Integral LEDS
We can be built with surface mount LEDs embedded into the switch package to provide a cost effective way for backlighting.
1) Embossed LED Window
This construction provides for a 180 view angle because the LED sits inside an embossed window. This also allows for a thinner construction.
2) Flat Overlay
This construction provides for a flat LED window. Filler is required to make up the height of the LED and this leads to a thicker construction.
Physical Characteristics
Life Cycles 2 million minimum non-tactile
1 million minimum tactile (metal or poly)
Operating Force 4 - 8 oz typical non-tactile
12 - 20 oz typical tactile
Overall Thickness .035" typical embossed LED window
.050" to .077" typical flat overlay
(depending on LED)
Environmental Characteristics
Operating/Storage Temp -40 to +65 standard
-40 to +85 available
Thermal Shock no effect after 100 cycles from -40 to +65C
Humidity no effect after exposure to 95% RH at 40C for 504 hours (non-tactile)
Electrical Characteristics
Contact Resistance: 100 ohms maximum typical
Open Circuit Resistance: 5 x 106 ohms minimum
Contact Rating: 30 VDC max, 100 mA max, 1 watt max
Contact Bounce: 20 ms max
Contact Material: Silver to silver